Checking around your windows for potential water damage can actually help you prevent costly future repairs. It does not matter if your home is older or completely new, water damage may occur. The older the home, the more likely that damage will occur at some point. Working on a warm sunny day is your best option for this type of repair work. On the edge of the screen, near the storm runners, if you see light, this could be a potential issue. Look near the corners of the wood window sill – if the wood is dark, you may have a problem. Just get a tube of caulk and fill the cracks so the water cannot get in. To help protect yourself, and your family, installing a security light outside can do wonders.
If you choose to do this, then you should go ahead and get motion sensor activated lighting. Install these lights near your front door and garage door in order to protect yourself when you are out at night. Adding one of these lights to your backyard can help you see on that side of the home as well. Whoever or whatever that walks into the motion sensor will turn the light on so that you can see who is there. These lights can also act as conventional lights giving you the ability to turn them on and off with the switch. Do you need some info in relation to how to order dumpsters have a peek here Fort Myers FL Dumpster Rental Pros.
One other thing you might want to do is get an infrared scan for your home to see how well insulated it actually is. People that own the cameras that are used for the scan charge a high price for using their equipment. You can take these pictures during the winter, spring, summer, or fall – you can even have this process done with your heater or air conditioner on. Daytime exposures are fine, though it is preferable to get your pictures done at night. This camera will show you exactly where the air is escaping from your house using IR and thermal imagery.
It is in your best interest to always plan home improvement projects with safety in mind. Most individuals that do try these projects move forward without having any idea of what to do or how to be safe while doing it. Some projects are simply too dangerous to do and may lead to your death. So always take your time when embarking on any changes that involve electricity or the addition of anything that can change load characteristics.
Spray-painting gets the job done really fast, often in under 10 minutes. And compared to regular paint, it dries quickly, and you won’t be dealing with any telltale brushstroke marks. Sounds great, right?
But first, you need to master the art of spray-painting, which we’ll teach you to do below.
One tip before we set you loose, though: If you’re a little hesitant to flip furniture currently in your home, opt for buying used furniture at a thrift store or via an app or website where people are selling used goods — so you can give your skills a test run first.
Step 1: Shop
Stock up on all the supplies you need to ensure you can complete your job quickly without another trip to the store. You’ll need a mask, sandpaper, primer, spray paint and a sealer, depending on the project. Don’t be tempted to buy the cheap or generic brands of paint. Brand names like Krylon or Rust-Oleum may cost a buck or two more, but it will be worth it in the end.
Much like other paint, spray paint has several different finish options, from flat to high gloss. Be sure to select the finish to fit your needs. For furniture, the higher the gloss, the easier it will be to clean. If it is a high-use piece, avoid flat paint — satin or gloss finishes work best for most projects. If you have a large project on your hands, do yourself a favor and invest in a spray paint handle — it can save your finger from aches and pains and make for a quicker job. They’re only a few dollars at most hardware stores.
Step 2: Clean & prep
Be sure your furniture piece is clean and free of loose pieces or cracks. Tighten any loose screws and fix any structural issues so the piece is sturdy. For best results, sanding your furniture first is essential. Depending on the finish, you’ll likely need a medium- to high-grit sandpaper. Sand the piece thoroughly, paying specific attention to any inconsistencies in the original finish or any rough areas. Always sand in the direction of the wood grain.
If you’re painting over a piece of furniture with a smooth glossy finish — like most pieces made of particle board or MDF — you’ll need to get that finish off as best as you can. Once it is sanded, wipe it down with a damp cloth to remove all the dust from the piece.
Step 3: Find a space
You should only spray-paint in a well-ventilated area and always wear a mask. Ideally you will be outdoors, so pick a day when the weather is neither too cold nor too hot, as that may affect dry times and create a bubbly finish.
In addition, avoid painting on a windy day. Not only will a lot of your paint blow off into the breeze, but you risk having particles of dust blow onto your wet project. Be sure to cover any surfaces that you don’t want to get paint on, even if you don’t think you’re close enough for it to matter. Spray paint can travel.